395 Sidney Street- Bulk Water Station
The City of Belleville's bulk water station is located at 395 Sidney Street. It is self-serve and operational 24 hours per day, 7 days a week.
Setting up your bulk water customer account
To set up your account, please complete the Bulk Water Online Application City staff will provide you with an electronic key card programmed with your customer account code to be picked up at City Hall. You will use the key at the bulk water station to turn on the pumps. The amount of water pumped will be recorded and your monthly bill will be charged accordingly.
Bulk water rate: $3.00 per Cubic Meter
Contact the Water Finance Department for further information.
How to use the bulk water station
Follow these steps:
1. Enter your customer account code on the keypad and hit enter.
2. Insert your electronic key card in the kiosk at the front of the station and hold until it beeps.
3. Use the touch pad to select the pump you want to use
- Pump 9 is a full 3-inch flow located on the west side of the building.
- Pump 10 is a half flow pump located on the east side of the building. This pump works well for smaller tanks (e.g. 1000 litre residential tank).
4. Connect your hose to the selected pump connection.
- Due to public health concerns, customers must provide their own hose.
- A 3-inch diameter female camlock connector is required.
5. Press the black button beside the pump to start and the red button to stop the flow.
6. Fill your tank to desired volume and press the red button to turn off the pump.
It takes 15-30 seconds for the water to stop flowing. This is to protect the equipment by preventing water hammer (i.e. vibrating pipes).
7. Disconnect your hose and camlock connector.
- In winter conditions, please use salt supplied and salt the area where any water spills during filling operations.
Report a problem
Call 613-966-3651 ext. 2279 if you experience any issues at the bulk water station.